comment_on_manual
をテンプレートにして作成
[
トップ
] [
新規
|
一覧
|
単語検索
|
最終更新
|
ヘルプ
]
開始行:
[[FrontPage]] > comment_on_manual
#contentsx
----
This page includes comments on the FlightGear Manual.
It is intended to feedback toward next version of Manual.
* v2.0.0 [#j7a1dd5e]
** Chapter 1 [#sbbe59b2]
Windows NT/2000/XP (Intel/AMD platform),
- comment
-- Windows Vista and Windows 7 should be included.
If you want to run FlightGearunder Mac OS X, you need to...
or higher.
- TeX conversion issue
-- FlightGearunder --> FlightGear under
-- Use "\FlightGear{}" instead of "\FlightGear" in TeX so...
Minimum hardware requirement is either a Power PC G4 1.0...
Mac, but We suggest...
- typo
-- but We --> but we
Historically, FlightGear was based on a flight model it ...
with the Navion airplane) from LaRCsim.
- comment
-- The word "FDM" is used without spelling out in Chapter...
-- Here, "flight model" --> "flight dynamics model (FDM)"...
More details of the UIUC flight model can be found at
http://www.uiuc.edu/ph/www/m-selig/apasim.html
- old link
-- http://www.uiuc.edu/ph/www/m-selig/apasim.html --> htt...
It is our hope that someday there will be an accompanyin...
Programmer's Guide a FlightGear Scenery Design Guide...
- typo
-- Guide a --> Guide, a
** Chapter 2 [#mef3a6d6]
*** 2.1 [#l35db295]
For Mac OS X, it is usually either
/Applications/FlightGear.app/Contents/Resources/data/Sce...
- comment
-- I think the word "either" should be deleted.
*** 2.1.2 [#f6f28f17]
If the installation via the GUI launcher failure for som...
you still have an alternative way to install the data.
- comment
-- I can't find verb in if sentence.
Probably, "failure" (noun) should be "fail" (verb).
Opening the data folder by pressing "Open data folder" o...
tab will pop up an Finder window for the data folder.
- comment
-- It seems a little bit redundant.
-- My suggestion:
--- Pressing "Open data folder" on the Others tab will po...
*** 2.1.4 [#a44def01]
If you are using Mac OS X 10.5, The GUI launcher automat...
specifies -S if svn is available.
- comment
-- "Mac OS X 10.5" only? Or "Mac OS X 10.5 and later"?
*** 2.2 [#tdfea740]
You can download aircraft from
http://www.flightgear.org/Downloads/aircraft/index.shtml
- comment
-- No longer available at aircraft/index.shtml.
-- For v2.0.0 aircraft: http://www.flightgear.org/Downloa...
-- Toward next release, we should ask to Curt where he is...
Simply download the file and uncompress it into the data...
subdirectory of your installation.
----
Once you have uncompressed them, there will be a new sub...
in your data/Aircraft directory containing the aircraft.
- comment
-- Some platform don't have "data" directory.
Is there a better common description so that it matches t...
--- Ubuntu: /usr/share/games/FlightGear/Aircraft
--- Fedora: /usr/share/FlightGear/Aircraft
Most of the packages named above include the complete Fl...
documentation including a PDF version of The FlightGear ...
intended for pretty printing using Adobe's Acrobat Reader,
available from
http://www.adobe.com/products/acrobat/
- comment
-- "Acrobat Reader" is old name. It's current name is "Ad...
-- http://www.adobe.com/products/acrobat/ should be http:...
** Chapter 3 [#l03c118f]
*** 3.1 [#u98dafc3]
There are two environment variables that must be defined...
- comment
-- The word "must" is not correct, because --fg-root and ...
*** 3.1.1 [#se73a270]
This is the data subdirectory of where you installed Fli...
- comment
-- Some platform don't have the directory named "data".
Is there a better common description so that it matches t...
--- Ubuntu: /usr/share/games/FlightGear/Aircraft
--- Fedora: /usr/share/FlightGear/Aircraft
***3.1.3 [#v4139ebc]
The graphical wizard on Windows and the GUI launcher on ...
internally define these environment variables...
- comment
-- This is not correct, because --fg-root and --fg-scener...
***3.2 [#za674c51]
FG_HOME=/usr/local/share/FlightGear
----
setenv FG_HOME=/usr/local/share/FlightGear
- comment
-- It might be better to describe what FG_HOME means.
***3.3.1 [#ya29d2af]
SET FG_HOME="c:\Program Files\FlightGear"
SET FG_ROOT="c:\Program Files\FlightGear\data"
SET FG_SCENERY="c:\Program Files\FlightGear\data\Scenery"
- Wrong format
-- fgfs.exe don't allow quoted path name with the letter ...
-- Correct format (what I have confirmed to run correctly...
SET FG_HOME=c:\Program Files\FlightGear
SET FG_ROOT=c:\Program Files\FlightGear\data
SET FG_SCENERY=c:\Program Files\FlightGear\data\Scenery
fgfs --option1 --option2... Command-line options are des...
in Chapter 3.5.
- comment
-- New line from "Command-line options..."
***3.4.2 [#d7679c44]
/Applications/FlightGear.app/Contents/Resouces/data/Scen...
- typo
-- Resouces --> Resources
***3.4.5 [#m2115762]
feet and |meters are available.
- typo
-- |meters --> meters
Clock never advances:
- comment
-- Move this item between "3D HUD" and "Real weather fetc...
Once favorites are added, You can switch...
- typo
-- You --> you
... on FlightGear Mac OS X web site. you can visit some ...
- typo
-- you --> You
... aircraft database might solve your problem. open
/Applications/Utilities/Terminal.app and type...
- typo
-- open --> Open
-- Delete line feed before ''/Applications/Utilities/Ter...
Or, insert line feed after ''/Applications/Utilities/Term...
you need to install FlightGear by copying the FlightGear...
- typo
-- you --> You
Entering space-separated options as shown in Figure 11 w...
additional options to FlightGear.
- comment
-- "Figure 11" is not included in the Manual.
So, delete sentence of "as shown in Figure 11".
***3.5.2 [#mfe99684]
--units-meters Use meters as the unit of measurement.
- comment
-- New line from "Use meters as..."
----
* v1.9.0 [#d66666a1]
- FlightGear Manual v1.9.0 原文の疑問点や要修正点をメモし...
** Chapter 2 [#vadf7e88]
Windows - any flavor,
Macintosh OSX,
Linux.
- Typo
Mac OS X,
*** 2.1 [#p283aa51]
For Windows, this directory is likely to be
c:\Program Files\FlightGear\data\Scenery.
- 要検討(軽微)
-- c:\Program Files\FlightGear\data\Scenery と、
c:\Program Files\FlightGear\Scenery のどちらが適切だろう...
--- 本家 wiki の記述では前者
--- インストーラ同梱の "Install & Uninstall Scenery" (fga...
--- デフォルトでインストールした場合、優先されるのは前者~
fgfs の起動時オプション: --fg-scenery=C:\Program Files\Fl...
--- 前者に入れる場合、ベースパッケージのシーナリー(サンフ...
--- どちらでも特に問題になることはないと思うけど、fgadmin...
--- 「シーナリーのインストール先は各人の好みで･･･」とした...
--- コメントありがとうございます。c:\Program Files\Flight...
To install the scenery, uncompress the tarball into the ...
directory. Most operating system provide tools to uncomp...
If you cannot uncompress the tarball, install an extract...
as 7-zip (http://www.7-zip.org/.
- Typo
(http://www.7-zip.org/).
~or?
(http://www.7-zip.org/.)
---これは前者です。
---了解です。ありがとうございます。-toshi
- 要検討(軽微)
-- なぜ fgadmin.exe を使ったシーナリーのインストール方法...
文字化けするから？ -toshi
Once you have uncompressed the tarball, the Terrain and ...
will contain additional sub-directories with your new sc...
- Typo
-- direcories --> directories
*** 2.1.2 [#ua6f823f]
2.1.2 FG_SCENERY
- 要検討
-- FG_SCENERYよりも、--fg-scenery を使う人の方が多いので...
This is where FlightGear looks for Scenery files. It con...
directories that will be searched in order. The director...
“:” on Unix and “;” on Windows.
- 要検討
-- Macは？
*** 2.1.3 [#fcbb2571]
-atlas=socket,out,1,localhost,5505,udp
- tex conversion issue
-- --atlas=socket,out,1,localhost,5505,udp
Note that TerraSync (when called with the "-S" command l...
recommended) is going to download Scenery via the Subver...
HTTP. Thus, is your Internet access is set up to use a H...
yourself aware how to configure the "libsvn" Subversion ...
proxy.
- Typo
-- is your Internet access is --> if your Internet access...
*** 2.1.4 [#u99edea3]
** 2.2 [#bc4aeb3b]
Simply download the file and uncompress it into the data...
of your installation.
- 要検討
-- ディストリビューションによっては、"data"という名前のサ...
--- Ubuntu intrepid (8.10): http://packages.ubuntu.com/in...
--- Fedora 10: http://rpm.pbone.net/index.php3/stat/4/idp...
If you are successful, there will be a new sub-directory...
FG_ROOT/data/Aircraft directory containing the aircraft.
- 要検討
-- FG_ROOT/Aircraft あるいは $FG_ROOT/Aircraft では？
-- FG_ROOT はここで初出。第3章に説明があることを記載する...
The aircraft are downloaded as .tar.gz files.
- 要修正
-- .tar.gz --> .zip
Some computers will download them as .tar.gz.zip files. ...
the file to .tar.gz before uncompressing them.
- 要削除
** 2.3 [#jfd1bdca]
Most of the packages named above include the complete Fl...
including a PDF version of The FlightGear Manual intende...
using Adobe’s Acrobat Reader, available from
http://www.adobe.com/products/acrobat/
- 要修正/検討
-- Adobe’s Acrobat Reader --> Adobe Reader
-- http://www.adobe.com/products/acrobat/ --> http://www....
Moreover, if properly installed, the ḣtml version...
FlightGear’s help menu entry.
- typo (non ASCII)
-- ḣtml --> html
* Chapter 3 [#p60238a2]
** 3.1 [#l0371d75]
There are two environmental variables that must be defin...
- 要検討
-- 環境変数の設定は"must"ではない。
-- むしろ、コマンドラインオプションで指定するのが一般的で...
*** 3.1.1 [#v921adc8]
This is the data subdirectory of where you installed Fli...
/usr/local/share/FlightGear/data or c:\Program Files\Fl...
- 要検討
-- ディストリビューションによっては、"data"という名前のサ...
--- Ubuntu intrepid (8.10): http://packages.ubuntu.com/in...
--- Fedora 10: http://rpm.pbone.net/index.php3/stat/4/idp...
This is where FlightGear will look for scenery files. It...
directories that will be searched in order. The director...
“:” on Unix and “;” on Windows. e.g.
- 要検討
-- (再び)macは？
*** 3.3.1 [#ndb9eb38]
Open a command shell, change to the directory where your...
(typically something like c:\Program Files\FlightGear\Wi...
environment variables by typing
- Typo
-- c:\Program Files\FlightGear\Win32\bin --> c:\Program F...
SET FG_HOME=~c:\Program Files\FlightGear~
SET FG_ROOT=~c:\Program Files\FlightGear\data~
SET FG_SCENERY=~c:\Program Files\FlightGear\data\Scenery~
- Typo and tex conversion issue
-- ~~ --> 削除
** 3.4 [#ub2183cd]
3.4 Launching the simulator under Mac OS X
- 要検討
-- コマンドラインの記述のみ。要書き換え。
** 3.5 [#j109bc44]
3.5 Command line parameters
- 要検討
-- 全面的に見直しが必要
*** 3.5.3 [#u2a71783]
For available choices check the directory /FlightGear/Ai...
files ending in ”-set.xml”.
- 要検討
-- /FlightGear/Aircraft --> FG_ROOT/Aircraft
*** 3.5.8 [#i52d5e8d]
However, the value set by these functions could be modif...
–time-offset function.
- tex conversion issue
-- –time-offset --> --time-offset
*** 3.5.10 [#l6a8394c]
Allows specifying a waypoint for the GC autopilot; it is...
multiple waypoints (i.eȧ route) via multiple instan...
- tex conversion issue
-- i.eȧ route --> i.e. a route
** 3.6 [#r04ec4a2]
- 要検討
-- $FG_ROOT で統一したほうが良いでしょう。
*** 3.6.1 [#u761ae4b]
$ °/ js demo
- tex conversion issue
-- $ °/ js demo --> ./js demo
Under Windows, open a command shell (Start|All Programs|...
the FlightGear binary folder and start the program as fo...
FlightGear is installed under c:\Flightgear)
- tex conversion issue
-- (Start$\left|\right.$All Programs$\left|\right.$Access...
On our system, the first few lines of output are (stop t...
if it is quickly scrolling past your window!) as follows:
- tex conversion issue
-- ^ C --> ctrl-C
Joystick test program.
- tex conversion issue
-- underline overwrites the next line
... etc˙u p to ...
- tex conversion issue
-- etc˙u p to --> etc. up to
*** 3.6.2 [#i1c16e52]
If the FlightGear base directory FlightGear does not alr...
options file .fgfsrc (under UNIX)/system.fgfsrc (under W...
above, just copy
- 要検討
-- "FlightGear base directory" is not clear. These words ...
-- .fgfsrc and system.fgfsrc should be placed in your hom...
http://www.lancs.ac.uk/people/cpaap/pfe/.
- old link
-- http://www.lancs.ac.uk/people/cpaap/pfe/ --> http://ww...
–prop:/input/joysticks/js[1]/axis[1]/binding/facto...
into
–prop:/input/joysticks/js[1]/axis[1]/binding/facto...
- tex conversion issue
-- –prop: --> --prop:
Concerning all the finer points, such as getting the joy...
John Check has written a very useful README included in ...
FlightGear/Docs/Readme/Joystick.html.
- Update
-- FlightGear/Docs/Readme/Joystick.html --> FlightGear/Do...
** Chapter 4 [#e8d5612c]
***4.1 [#g3b6cd33]
If the s are off, you’ll have to start them before proce...
- tex conversion issue
-- If the s are off --> If the engines are off
For that you’ll need the , which you’ll find in the lowe...
- tex conversion issue
-- you'll need the , --> you'll need the ignition switch,
Now you can hit the “s” key to operate the .
- tex conversion issue
-- Now you can hit the “s” key to operate the starter.
***4.2 [#nb880fff]
Ctrl + U Add 1000 ftṫo your altitude (emergency)
- tex conversion issue in tab5.tex
-- Add 1000 ft. to your altitude (emergency)
Note: If you have difficulty processing the screenshot f...
on a Windows machine, just recall that simply pressing t...
copies the screen to the clipboard, from which you can p...
graphics program.
- Typo
-- Print --> Print Screen
***4.4 [#y9188191]
- Place Fig.5 above Fig.6.
If you don’t have pedals or lack the experience to handl...
ratio between aileron/rudder automatically, you can star...
with the option --enable-auto-coordination.
- Typo?
-- automatically --> manually
Besides these, there are several supplementary instrumen...
left you will find the clock, obviously being an importa...
instance for determining turn rates.Below
- Typo
-- rates.Below --> rates. Below
The instruments below indicate the position of youryoke.
- Typo
-- youryoke. --> your yoke.
#br
----
このページには、FlightGear Manual を1.0.0 に対応させる為...
* 第一章 [#e79a375a]
** 1.2 System Requirements [#ja1dbf1f]
- 1.0.0 は Pentium III で本当に十分に動作するのだろうか?
- 1.0.0 を動作させるには 256MB のVRAM は欲しいところ
- 1.0.0 のバイナリとベースパッケージをインストールには 40...
- 1.0.0 を開発するには、コード、データ、オブジェクトファ...
- CVS 版を開発するには、コード、データ、オブジェクトファ...
つづく...
----
- マニュアル v1.9.0 に対するメモの記入を始めました -- [[t...
- 120.28.64.69 からの SPAM が発生したため、コメント欄を削...
- 本ページの位置づけに合わせてページ名を変更。1.0.0 向け...
- 「マニュアルの要修正点」を「comment_on_manual」にリネー...
終了行:
[[FrontPage]] > comment_on_manual
#contentsx
----
This page includes comments on the FlightGear Manual.
It is intended to feedback toward next version of Manual.
* v2.0.0 [#j7a1dd5e]
** Chapter 1 [#sbbe59b2]
Windows NT/2000/XP (Intel/AMD platform),
- comment
-- Windows Vista and Windows 7 should be included.
If you want to run FlightGearunder Mac OS X, you need to...
or higher.
- TeX conversion issue
-- FlightGearunder --> FlightGear under
-- Use "\FlightGear{}" instead of "\FlightGear" in TeX so...
Minimum hardware requirement is either a Power PC G4 1.0...
Mac, but We suggest...
- typo
-- but We --> but we
Historically, FlightGear was based on a flight model it ...
with the Navion airplane) from LaRCsim.
- comment
-- The word "FDM" is used without spelling out in Chapter...
-- Here, "flight model" --> "flight dynamics model (FDM)"...
More details of the UIUC flight model can be found at
http://www.uiuc.edu/ph/www/m-selig/apasim.html
- old link
-- http://www.uiuc.edu/ph/www/m-selig/apasim.html --> htt...
It is our hope that someday there will be an accompanyin...
Programmer's Guide a FlightGear Scenery Design Guide...
- typo
-- Guide a --> Guide, a
** Chapter 2 [#mef3a6d6]
*** 2.1 [#l35db295]
For Mac OS X, it is usually either
/Applications/FlightGear.app/Contents/Resources/data/Sce...
- comment
-- I think the word "either" should be deleted.
*** 2.1.2 [#f6f28f17]
If the installation via the GUI launcher failure for som...
you still have an alternative way to install the data.
- comment
-- I can't find verb in if sentence.
Probably, "failure" (noun) should be "fail" (verb).
Opening the data folder by pressing "Open data folder" o...
tab will pop up an Finder window for the data folder.
- comment
-- It seems a little bit redundant.
-- My suggestion:
--- Pressing "Open data folder" on the Others tab will po...
*** 2.1.4 [#a44def01]
If you are using Mac OS X 10.5, The GUI launcher automat...
specifies -S if svn is available.
- comment
-- "Mac OS X 10.5" only? Or "Mac OS X 10.5 and later"?
*** 2.2 [#tdfea740]
You can download aircraft from
http://www.flightgear.org/Downloads/aircraft/index.shtml
- comment
-- No longer available at aircraft/index.shtml.
-- For v2.0.0 aircraft: http://www.flightgear.org/Downloa...
-- Toward next release, we should ask to Curt where he is...
Simply download the file and uncompress it into the data...
subdirectory of your installation.
----
Once you have uncompressed them, there will be a new sub...
in your data/Aircraft directory containing the aircraft.
- comment
-- Some platform don't have "data" directory.
Is there a better common description so that it matches t...
--- Ubuntu: /usr/share/games/FlightGear/Aircraft
--- Fedora: /usr/share/FlightGear/Aircraft
Most of the packages named above include the complete Fl...
documentation including a PDF version of The FlightGear ...
intended for pretty printing using Adobe's Acrobat Reader,
available from
http://www.adobe.com/products/acrobat/
- comment
-- "Acrobat Reader" is old name. It's current name is "Ad...
-- http://www.adobe.com/products/acrobat/ should be http:...
** Chapter 3 [#l03c118f]
*** 3.1 [#u98dafc3]
There are two environment variables that must be defined...
- comment
-- The word "must" is not correct, because --fg-root and ...
*** 3.1.1 [#se73a270]
This is the data subdirectory of where you installed Fli...
- comment
-- Some platform don't have the directory named "data".
Is there a better common description so that it matches t...
--- Ubuntu: /usr/share/games/FlightGear/Aircraft
--- Fedora: /usr/share/FlightGear/Aircraft
***3.1.3 [#v4139ebc]
The graphical wizard on Windows and the GUI launcher on ...
internally define these environment variables...
- comment
-- This is not correct, because --fg-root and --fg-scener...
***3.2 [#za674c51]
FG_HOME=/usr/local/share/FlightGear
----
setenv FG_HOME=/usr/local/share/FlightGear
- comment
-- It might be better to describe what FG_HOME means.
***3.3.1 [#ya29d2af]
SET FG_HOME="c:\Program Files\FlightGear"
SET FG_ROOT="c:\Program Files\FlightGear\data"
SET FG_SCENERY="c:\Program Files\FlightGear\data\Scenery"
- Wrong format
-- fgfs.exe don't allow quoted path name with the letter ...
-- Correct format (what I have confirmed to run correctly...
SET FG_HOME=c:\Program Files\FlightGear
SET FG_ROOT=c:\Program Files\FlightGear\data
SET FG_SCENERY=c:\Program Files\FlightGear\data\Scenery
fgfs --option1 --option2... Command-line options are des...
in Chapter 3.5.
- comment
-- New line from "Command-line options..."
***3.4.2 [#d7679c44]
/Applications/FlightGear.app/Contents/Resouces/data/Scen...
- typo
-- Resouces --> Resources
***3.4.5 [#m2115762]
feet and |meters are available.
- typo
-- |meters --> meters
Clock never advances:
- comment
-- Move this item between "3D HUD" and "Real weather fetc...
Once favorites are added, You can switch...
- typo
-- You --> you
... on FlightGear Mac OS X web site. you can visit some ...
- typo
-- you --> You
... aircraft database might solve your problem. open
/Applications/Utilities/Terminal.app and type...
- typo
-- open --> Open
-- Delete line feed before ''/Applications/Utilities/Ter...
Or, insert line feed after ''/Applications/Utilities/Term...
you need to install FlightGear by copying the FlightGear...
- typo
-- you --> You
Entering space-separated options as shown in Figure 11 w...
additional options to FlightGear.
- comment
-- "Figure 11" is not included in the Manual.
So, delete sentence of "as shown in Figure 11".
***3.5.2 [#mfe99684]
--units-meters Use meters as the unit of measurement.
- comment
-- New line from "Use meters as..."
----
* v1.9.0 [#d66666a1]
- FlightGear Manual v1.9.0 原文の疑問点や要修正点をメモし...
** Chapter 2 [#vadf7e88]
Windows - any flavor,
Macintosh OSX,
Linux.
- Typo
Mac OS X,
*** 2.1 [#p283aa51]
For Windows, this directory is likely to be
c:\Program Files\FlightGear\data\Scenery.
- 要検討(軽微)
-- c:\Program Files\FlightGear\data\Scenery と、
c:\Program Files\FlightGear\Scenery のどちらが適切だろう...
--- 本家 wiki の記述では前者
--- インストーラ同梱の "Install & Uninstall Scenery" (fga...
--- デフォルトでインストールした場合、優先されるのは前者~
fgfs の起動時オプション: --fg-scenery=C:\Program Files\Fl...
--- 前者に入れる場合、ベースパッケージのシーナリー(サンフ...
--- どちらでも特に問題になることはないと思うけど、fgadmin...
--- 「シーナリーのインストール先は各人の好みで･･･」とした...
--- コメントありがとうございます。c:\Program Files\Flight...
To install the scenery, uncompress the tarball into the ...
directory. Most operating system provide tools to uncomp...
If you cannot uncompress the tarball, install an extract...
as 7-zip (http://www.7-zip.org/.
- Typo
(http://www.7-zip.org/).
~or?
(http://www.7-zip.org/.)
---これは前者です。
---了解です。ありがとうございます。-toshi
- 要検討(軽微)
-- なぜ fgadmin.exe を使ったシーナリーのインストール方法...
文字化けするから？ -toshi
Once you have uncompressed the tarball, the Terrain and ...
will contain additional sub-directories with your new sc...
- Typo
-- direcories --> directories
*** 2.1.2 [#ua6f823f]
2.1.2 FG_SCENERY
- 要検討
-- FG_SCENERYよりも、--fg-scenery を使う人の方が多いので...
This is where FlightGear looks for Scenery files. It con...
directories that will be searched in order. The director...
“:” on Unix and “;” on Windows.
- 要検討
-- Macは？
*** 2.1.3 [#fcbb2571]
-atlas=socket,out,1,localhost,5505,udp
- tex conversion issue
-- --atlas=socket,out,1,localhost,5505,udp
Note that TerraSync (when called with the "-S" command l...
recommended) is going to download Scenery via the Subver...
HTTP. Thus, is your Internet access is set up to use a H...
yourself aware how to configure the "libsvn" Subversion ...
proxy.
- Typo
-- is your Internet access is --> if your Internet access...
*** 2.1.4 [#u99edea3]
** 2.2 [#bc4aeb3b]
Simply download the file and uncompress it into the data...
of your installation.
- 要検討
-- ディストリビューションによっては、"data"という名前のサ...
--- Ubuntu intrepid (8.10): http://packages.ubuntu.com/in...
--- Fedora 10: http://rpm.pbone.net/index.php3/stat/4/idp...
If you are successful, there will be a new sub-directory...
FG_ROOT/data/Aircraft directory containing the aircraft.
- 要検討
-- FG_ROOT/Aircraft あるいは $FG_ROOT/Aircraft では？
-- FG_ROOT はここで初出。第3章に説明があることを記載する...
The aircraft are downloaded as .tar.gz files.
- 要修正
-- .tar.gz --> .zip
Some computers will download them as .tar.gz.zip files. ...
the file to .tar.gz before uncompressing them.
- 要削除
** 2.3 [#jfd1bdca]
Most of the packages named above include the complete Fl...
including a PDF version of The FlightGear Manual intende...
using Adobe’s Acrobat Reader, available from
http://www.adobe.com/products/acrobat/
- 要修正/検討
-- Adobe’s Acrobat Reader --> Adobe Reader
-- http://www.adobe.com/products/acrobat/ --> http://www....
Moreover, if properly installed, the ḣtml version...
FlightGear’s help menu entry.
- typo (non ASCII)
-- ḣtml --> html
* Chapter 3 [#p60238a2]
** 3.1 [#l0371d75]
There are two environmental variables that must be defin...
- 要検討
-- 環境変数の設定は"must"ではない。
-- むしろ、コマンドラインオプションで指定するのが一般的で...
*** 3.1.1 [#v921adc8]
This is the data subdirectory of where you installed Fli...
/usr/local/share/FlightGear/data or c:\Program Files\Fl...
- 要検討
-- ディストリビューションによっては、"data"という名前のサ...
--- Ubuntu intrepid (8.10): http://packages.ubuntu.com/in...
--- Fedora 10: http://rpm.pbone.net/index.php3/stat/4/idp...
This is where FlightGear will look for scenery files. It...
directories that will be searched in order. The director...
“:” on Unix and “;” on Windows. e.g.
- 要検討
-- (再び)macは？
*** 3.3.1 [#ndb9eb38]
Open a command shell, change to the directory where your...
(typically something like c:\Program Files\FlightGear\Wi...
environment variables by typing
- Typo
-- c:\Program Files\FlightGear\Win32\bin --> c:\Program F...
SET FG_HOME=~c:\Program Files\FlightGear~
SET FG_ROOT=~c:\Program Files\FlightGear\data~
SET FG_SCENERY=~c:\Program Files\FlightGear\data\Scenery~
- Typo and tex conversion issue
-- ~~ --> 削除
** 3.4 [#ub2183cd]
3.4 Launching the simulator under Mac OS X
- 要検討
-- コマンドラインの記述のみ。要書き換え。
** 3.5 [#j109bc44]
3.5 Command line parameters
- 要検討
-- 全面的に見直しが必要
*** 3.5.3 [#u2a71783]
For available choices check the directory /FlightGear/Ai...
files ending in ”-set.xml”.
- 要検討
-- /FlightGear/Aircraft --> FG_ROOT/Aircraft
*** 3.5.8 [#i52d5e8d]
However, the value set by these functions could be modif...
–time-offset function.
- tex conversion issue
-- –time-offset --> --time-offset
*** 3.5.10 [#l6a8394c]
Allows specifying a waypoint for the GC autopilot; it is...
multiple waypoints (i.eȧ route) via multiple instan...
- tex conversion issue
-- i.eȧ route --> i.e. a route
** 3.6 [#r04ec4a2]
- 要検討
-- $FG_ROOT で統一したほうが良いでしょう。
*** 3.6.1 [#u761ae4b]
$ °/ js demo
- tex conversion issue
-- $ °/ js demo --> ./js demo
Under Windows, open a command shell (Start|All Programs|...
the FlightGear binary folder and start the program as fo...
FlightGear is installed under c:\Flightgear)
- tex conversion issue
-- (Start$\left|\right.$All Programs$\left|\right.$Access...
On our system, the first few lines of output are (stop t...
if it is quickly scrolling past your window!) as follows:
- tex conversion issue
-- ^ C --> ctrl-C
Joystick test program.
- tex conversion issue
-- underline overwrites the next line
... etc˙u p to ...
- tex conversion issue
-- etc˙u p to --> etc. up to
*** 3.6.2 [#i1c16e52]
If the FlightGear base directory FlightGear does not alr...
options file .fgfsrc (under UNIX)/system.fgfsrc (under W...
above, just copy
- 要検討
-- "FlightGear base directory" is not clear. These words ...
-- .fgfsrc and system.fgfsrc should be placed in your hom...
http://www.lancs.ac.uk/people/cpaap/pfe/.
- old link
-- http://www.lancs.ac.uk/people/cpaap/pfe/ --> http://ww...
–prop:/input/joysticks/js[1]/axis[1]/binding/facto...
into
–prop:/input/joysticks/js[1]/axis[1]/binding/facto...
- tex conversion issue
-- –prop: --> --prop:
Concerning all the finer points, such as getting the joy...
John Check has written a very useful README included in ...
FlightGear/Docs/Readme/Joystick.html.
- Update
-- FlightGear/Docs/Readme/Joystick.html --> FlightGear/Do...
** Chapter 4 [#e8d5612c]
***4.1 [#g3b6cd33]
If the s are off, you’ll have to start them before proce...
- tex conversion issue
-- If the s are off --> If the engines are off
For that you’ll need the , which you’ll find in the lowe...
- tex conversion issue
-- you'll need the , --> you'll need the ignition switch,
Now you can hit the “s” key to operate the .
- tex conversion issue
-- Now you can hit the “s” key to operate the starter.
***4.2 [#nb880fff]
Ctrl + U Add 1000 ftṫo your altitude (emergency)
- tex conversion issue in tab5.tex
-- Add 1000 ft. to your altitude (emergency)
Note: If you have difficulty processing the screenshot f...
on a Windows machine, just recall that simply pressing t...
copies the screen to the clipboard, from which you can p...
graphics program.
- Typo
-- Print --> Print Screen
***4.4 [#y9188191]
- Place Fig.5 above Fig.6.
If you don’t have pedals or lack the experience to handl...
ratio between aileron/rudder automatically, you can star...
with the option --enable-auto-coordination.
- Typo?
-- automatically --> manually
Besides these, there are several supplementary instrumen...
left you will find the clock, obviously being an importa...
instance for determining turn rates.Below
- Typo
-- rates.Below --> rates. Below
The instruments below indicate the position of youryoke.
- Typo
-- youryoke. --> your yoke.
#br
----
このページには、FlightGear Manual を1.0.0 に対応させる為...
* 第一章 [#e79a375a]
** 1.2 System Requirements [#ja1dbf1f]
- 1.0.0 は Pentium III で本当に十分に動作するのだろうか?
- 1.0.0 を動作させるには 256MB のVRAM は欲しいところ
- 1.0.0 のバイナリとベースパッケージをインストールには 40...
- 1.0.0 を開発するには、コード、データ、オブジェクトファ...
- CVS 版を開発するには、コード、データ、オブジェクトファ...
つづく...
----
- マニュアル v1.9.0 に対するメモの記入を始めました -- [[t...
- 120.28.64.69 からの SPAM が発生したため、コメント欄を削...
- 本ページの位置づけに合わせてページ名を変更。1.0.0 向け...
- 「マニュアルの要修正点」を「comment_on_manual」にリネー...
ページ名:
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
