Re: FGCOMについて

fgcom - a communication radio based on VoIP with IAX/Asterisk
(c)2007 by H. Wirtz <wirtz@dfn.de>
Version 1.2.2 build 209 win32mod
Using iaxclient library Version SVN UNKNOWN

  OPTION                                        DESCRIPTION

  -d, -debug, --debug=                          show debugging information
  -S
, -voipserver, --voipserver=               voip server to connect to (defau
lt: 'fgcom.flightgear.org.uk')
  -s
, -fgserver, --fgserver=                   fg to connect to  (default: 'loc
alhost')
  -p
, -port, --port=                           where we should listen to FG (de
fault: '16661')
  -a
, -airport, --airport=                     airport-id (ICAO) for ATC-mode
  -f
, -frequency, --frequency=                 frequency for ATC-mode
  -U
, -user, --user=                           username for VoIP account (defau
lt: 'guest')
  -P
, -password, --password=                   password for VoIP account (defau
lt: 'guest')
  -i
, -mic, --mic=                             mic input level (0.0 - 1.0)
  -o
, -speaker, --speaker=                     speaker output level (0.0 - 1.0)

  -b, -mic-boost, --mic-boost=                  enable mic boost
  -l, -list-audio, --list-audio=                list audio devices
  -r
, -set-audio-in, --set-audio-in=           use <devicename> as audio input
  -k
, -set-audio-out, --set-audio-out=         use <devicename> as audio output

  -c
, -codec, --codec=                         use codec <codec> as transfer co
dec (default: 'u')

  Available codecs:
        u - ulaw (default and best codec because the mixing is based onto ulaw)
        a - alaw
        g - gsm
        s - speex
        7 - G.723


  Mode 1: client for COM1 of flightgear:
        $ fgcom
  - connects fgcom to fgfs at localhost:16661
        $ fgcom -sother.host.tld -p23456
  - connects %s to fgfs at other.host.tld:23456

  Mode 2: client for an ATC at <airport> on <frequency>:
        $ fgcom -aKSFO -f120.500
  - sets up fgcom for an ATC radio at KSFO 120.500 MHz


Note that fgcom starts with a guest account unless you use -U and -P!

fgcom - a communication radio based on VoIP with IAX/Asterisk
(c)2007 by H. Wirtz <wirtz@dfn.de>
Version 2.0.0 build unknown
Using iaxclient library Version 2.0

fgcom: unrecognized option `--help'
Usage: fgcom [-u user] [-w password] [[-S voipserver] [-C codec] [-s fgserver] [
-p port]] | [[-a airport] [-f frequency]] [-d]

--user          | -U     username for VoIP account (default: 'guest')
--password      | -P     password for VoIP account (default: 'guest')
--voipserver    | -S     voip server to connect to (default 'fgcom1.parasitstudi
o.de')
--fg            | -s     fg to connect to (default 'localhost')
--port          | -p     where we should listen to FG(default '16661')
--airport       | -a     airport-id (ICAO) for ATC-mode
--frequency     | -f     frequency for ATC-mode
--mic           | -i     mic input level (0.0 - 1.0)
--speaker       | -o     speaker output level (0.0 - 1.0)
--debug         | -d     show debugging information
--mic-boost     | -b     enable mic boost
--list-audio    | -l     list audio devices
--set-audio-in  | -r     use <devicename> as audio input
--set-audio-out | -k     use <devicename> as audio output
--codec         | -C     use codec <codec> as transfer codec (default: u)

Usable Codecs are:
u - ulaw (default and best codec because the mixing is based onto ulaw)
a - alaw
g - gsm
s - speex
7 - G.723

Mode 1: client for COM1 of flightgear:
$ fgcom
- connects fgcom to fgfs at localhost:16661
$ fgcom -sother.host.tld -p23456
- connects fgcom to fgfs at other.host.tld:23456

Mode 2: client for an ATC at <airport> on <frequency>:
$ fgcom -aKSFO -d120.500
- sets up fgcom for an ATC radio at KSFO 120.500 MHz

Note that fgcom starts with a guest account unless you use -U and -P!

fgcom - a communication radio based on VoIP with IAX/Asterisk
(c)2007 by H. Wirtz <wirtz@dfn.de>
Version 1.1.0 build unknown
Using iaxclient library Version SVN UNKNOWN

fgcom: invalid option -- h
Usage: fgcom [-u user] -w [password] [[-s voipserver] [-p port]] | [[-a airport]
 [-f frequency]] [-d]

--user          | -U     username for VoIP account (default: 'guest')
--password      | -P     password for VoIP account (default: 'guest')
--voipserver    | -s     voip server to ceonnect to (default 'localhost')
--port          | -p     where we should listen to FG(default '16661')
--airport       | -a     airport-id (ICAO) for ATC-mode
--frequency     | -f     frequency for ATC-mode
--mic           | -i     mic input level (0.0 - 1.0)
--speaker       | -o     speaker output level (0.0 - 1.0)
--debug         | -d     show debugging information
--mic-boost     | -b     enable mic boost
--list-audio    | -l     list audio devices
--set-audio-in  | -r     use <devicename> as audio input
--set-audio-out | -k     use <devicename> as audio output

Mode 1: client for COM1 of flightgear:
$ fgcom
- connects fgcom to fgfs at localhost:16661
$ fgcom -sother.host.tld -p23456
- connects fgcom to fgfs at other.host.tld:23456

Mode 2: client for an ATC at <airport> on <frequency>:
$ fgcom -aKSFO -d120.500
- sets up fgcom for an ATC radio at KSFO 120.500 MHz

Note that fgcom starts with a guest account unless you use -U and -P!